Drilling
Drilling
CKP RADIAL DRILLING MACHINES - RDH/325/GT
RADIAL DRILLING MACHINES - RDH/325/GT
Main Features: :
The robust and streamlined construction enables if to withstand and absorb heavy cutting forces.
Drilling head is mounted over a sturdy arm attached to the pillar.
Both the arm and the drilling head can be swiveled and clamped to any desired position. The arm can be raised by means of rack and pinion mechanism actuated by a hand lever, to any height with in its capacity.
Drive is transmitted from motor to spindle through five stepped V-groove pulley and V-belt.
Reduction gear unit mounted at the top of the machine head provides ten wide range of spindle speeds.
TReduction gear unit is operated by means of a hand lever, provided within the easy reach of the operator.
Circular table at the base mounted over an arm which can be swiveled around to any desired position and can be fixed in anyone of the T-slots or can be removed so that the whole base can be used.
NOTE :
The above specifications are approximate only. Due to constant improvement, design the specification are subject to change without notice.
- Accessories
- Technical Specification
Extra Equipments at extra cost
| Drill Chuck |
| Light Fittings |
| Coolant Pump |
| Reduction Sleeves |
| Machine vice |
| D.O.L Strater |
Optional Spindle Speeds: at extra cost
| With 1 HP 960 rpm motor - 65-95-140-205-300-390-570-840-1230-1800 |
| With 1 HP 720 /1440 rpm motor - 50-71-105-155-225-300-426-630-930-1350/ 100-142-210-310-450-600-852-1260-1860-2700 |
| Specification | RDH/325/GT |
|---|