Lathe

Lathe

TURBO - Heavy Duty 265 All Geared Lathe Machine

Heavy Duty 265 All Geared Head Lathe Machine

SPECIAL FEATURE
Bed is made form 25 Grade Cast Iron of 180 BHN hardness, strictly checked with Microlevel, Hardness Tester and Straightedge.
Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground spindle made from alloy steel.
Apron is totally enclosed in oil bath system with lever type arrangement for automatic feeds.
Hexagonal shaped Tail Stock with hardened and ground tail stock spindle made from alloy steel having external and internal grinding.
Hardened and ground gear made from 20 Mn Cr 5.

 

DOUBLE SCREW NORTON GEAR BOX
Provided as time saver equipment with separate thread & feed shaft. Thus, feed & thread gears could be changed rapidly and decreases wear and tear of half nut and lead screw.
Instruction manual as per Indian standard IS – 1878 (part-1) 1993.

  • Accessories
  • Technical Specification

STANDARD ACCESSORIES

Norton Gear Box (Double Screw)
Steady Rest ( Start from 7? machine)
Follow Rest
Chuck Plate
Tool Post Key
Centre Adaptor
Dead Centre (2 Nos.)
Motor Pulley
Four Position Tool Post
Electric Motor – 5 HP 3 PH. 1440 rpm
Motor V-belt set
Electric Panel Board (Hanging Type)
Rear Splash Guard

EXTRA ACCESSORIES

Dog or True Chuck
Coolant Pump, Tank and Nozzle
Quick Change tool Post with Tool holders/ Rear Tool Post with Long cross Slide
Taper Turning Attachment
Face plate
Machine Lamp
Electro Magnetic Brake with Footpedal

EXTRA FEATURES

A26 Spindle with 54mm
A28 Spindle with 80mm
A211 Spindle with 105mm
Extra center height 12” to 15”
Extra bed width 15”
Any special requirement as per customer’s drawing.
Specification 265 / 1 265 / 2 265 / 3 265 / 4 265 / 5
Bed:
Bed Type2 V & 2 Flat2 V & 2 Flat2 V & 2 Flat2 V & 2 Flat2 V & 2 Flat
Bed Length1676 (5' 6")2135 (7')2740 (9')3050 (10')3650 (12')
Bed Width323 (12..¾")323 (12..¾")323 (12..¾")323 (12..¾")323 (12..¾")
Gap Length165 mm165 mm165 mm165 mm165 mm
Capacity:
Height Of Centre265 (10.5")265 (10.5")265 (10.5")265 (10.5")265 (10.5")
Swing over Bed520 mm520 mm520 mm520 mm520 mm
Swing in Gap820 mm820 mm820 mm820 mm820 mm
Swing over Cross Slide320 mm320 mm320 mm320 mm320 mm
Distance Between Centre550 mm985 mm1600 mm1900 mm2500 mm
Movement of Cross Slide240 mm240 mm240 mm240 mm240 mm
Movement of Compound Slide140 mm140 mm140 mm
Main Spindle:
Spindle Nose (Threaded Type)Ø 76.2 mmØ 76.2 mmØ 76.2 mmØ 76.2 mmØ 76.2 mm
Taper Bore in Spindle SleeveMT-4MT-4MT-4MT-4MT-4
Spindle BoreØ 54 (2.1/8") Ø 54 (2.1/8") Ø 54 (2.1/8") Ø 54 (2.1/8") Ø 54 (2.1/8")
Tail Stock:
Quill DiaØ 60.3 mmØ 60.3 mmØ 60.3 mm
Taper in QuillMT-4MT-4MT-4
Quill Travel180 mm180 mm180 mm
Speed:
No. of Spindle Speed888
RPM (Low/High)30 – 120030 – 120030 – 1200
Feeds:
Nos. of feeds Range6868686868
Longitudinal / Rev.0.066 – 2.359mm0.066 – 2.359mm0.066 – 2.359mm0.066 – 2.359mm0.066 – 2.359mm
Transverse / Rev.0.016 – 0.564mm0.016 – 0.564mm0.016 – 0.564mm0.016 – 0.564mm0.016 – 0.564mm
Thread / No. of Range
Metric Thread24 (0.5 -15 mm)24 (0.5 -15 mm)24 (0.5 -15 mm)24 (0.5 -15 mm)24 (0.5 -15 mm)
English Thread44 (2-60 TPI)44 (2-60 TPI)44 (2-60 TPI)44 (2-60 TPI)44 (2-60 TPI)
Lead ScrewØ 38 mm x 4 TPIØ 38 mm x 4 TPIØ 38 mm x 4 TPIØ 38 mm x 4 TPIØ 38 mm x 4 TPI
Feed ShaftØ 31.75 mmØ 31.75 mmØ 31.75 mmØ 31.75 mmØ 31.75 mm
Electricals:
Motor Power5 H.P. / 3.75 KW5 H.P. / 3.75 KW5 H.P. / 3.75 KW5 H.P. / 3.75 KW5 H.P. / 3.75 KW
General:
Weight (Approx.)1350 Kg.1500 Kg.1800 Kg.2000 Kg.2250 Kg.
Floor Space Occupied in (mm)2000 x 10002500 x 10003000 x 10003350 x 10004000 x 1000
(Approx.)L x W x Hx 1370x 1370x 1370x 1370x 1370